LIGHT GAUGE STEEL STUD FRAMING CONSTRUCTION IN CANADA
Light gauge steel stud framing construction is very similar to wood framed construction in principle -only the difference is replace wooden frames with light gauge steel stud frames in canada . The steel sections used here are called cold formed sections, Cold formed steel is shaped by guiding thin sheets of steel through a series of rollers, meaning that the sections are formed, or given shape at room temperature. This is in contrast to thicker hot rolled sections, result of converting a flat sheet of steel into a C or S-shaped section.
Light gauge steel stud framing walling is used across many different construction sectors in canada like commercial, residential and leisure and “As well as the benefits of fast track construction and ease of handling, light gauge steel studs framing also offers a highly sustainable method of construction. Production is energy efficient, it optimises lighter structures mean that footings can be less extensive.Light gauge steel framing is lighter, stronger and straighter resulting in dynamic designing and labour cost savings for canada. A steel framed home will always have straight walls and square corners.
Light gauge steel studs is lighter, stronger and straighter resulting in dynamic designing and labour cost savings. A steel framed home will always have straight walls and square corners. Steel framing can take popular finishes like brick, stucco and stone among others. As light gauge steel studs has the highest strength to weight ratio of building material available in canada, Steel studs frames will not contribute to a fire as fuel as result canadian people go for steel stud framing for residential construction .
Steel Stud Framing For Commercial Construction in Canada
When it comes to steel stud frames, instead of buying woods, consider steel for non-load bearing walls. According to the Canadian Builders, more than 40 percent of commercial structures in Canada are now built with steel studs Frames past decade. Most steel studs frames are made from sheet steel that are similar to what builders are accustomed to in dimensional lumber (2×4, 2×6, 2×8, 2×10, 2×12 and so forth).
The strength and ductility of structural cold-formed steel (CFS) framing, along with the holding power of CFS connections, make it ideal for construction in high-wind and seismic zones such. Steel studs framing is easier to handle because the studs weigh a third less than wood and can be installed at 24 inches on center.